You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Well Dave, I guess the 25* degree slanted down radials didn't please you. I didn't expect the maximum angle to pop up like it did either. Maybe my idea of the 25* degrees angle I used...was just too much.

Here is the Imax with 72" and 108" radials both horizontal and slanted down. If these models are even close, then I don't understand the Imax GPK being made for slanted radials.

If you notice that the red line current indicators are strange looking an pronounced, not to worry...they are like that because the segmentation is still using less than 20 segments just like NM5K did using Eznec Demo.

If you do try this NM5K idea...keep us posted, OK?

[ATTACH]10224[/ATTACH]

[QUOTE="Marconi, post: 426755, member: 903"] Well Dave, I guess the 25* degree slanted down radials didn't please you. I didn't expect the maximum angle to pop up like it did either. Maybe my idea of the 25* degrees angle I used...was just too much. Here is the Imax with 72" and 108" radials both horizontal and slanted down. If these models are even close, then I don't understand the Imax GPK being made for slanted radials. If you notice that the red line current indicators are strange looking an pronounced, not to worry...they are like that because the segmentation is still using less than 20 segments just like NM5K did using Eznec Demo. If you do try this NM5K idea...keep us posted, OK? [ATTACH]10224.vB[/ATTACH] [/QUOTE]

Top Bottom