You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Cool Irock ! I scraped putting the yagi elements in front of the pdl2 as i couldnt get even near a good match and the antenna wouldnt even near resonate where i wanted it to.I ended up putting a quad director in front of the pdl2 to see what it would do.I was able to get it to match and resonate but i think im going a different route.Im building a 4 element direct feed quad..Im using all fiberglass spreaders from the boom on out so there will be no extra added capacitance and i will be able to cut the wire exactly for the target freq.anyway , let me know how it goes for you and i will do the same , Darryl

[QUOTE="sob, post: 373338, member: 25100"] Cool Irock ! I scraped putting the yagi elements in front of the pdl2 as i couldnt get even near a good match and the antenna wouldnt even near resonate where i wanted it to.I ended up putting a quad director in front of the pdl2 to see what it would do.I was able to get it to match and resonate but i think im going a different route.Im building a 4 element direct feed quad..Im using all fiberglass spreaders from the boom on out so there will be no extra added capacitance and i will be able to cut the wire exactly for the target freq.anyway , let me know how it goes for you and i will do the same , Darryl [/QUOTE]

Top Bottom