Astatic D104M6B

[tshows]

Does anyone know where you can buy the push to talk switch for the Astatic D104M6B?

 

[tshows]

Bump

 

[Robb]

Try the mfr yet?

 

[jon666]

yep

ebay

 

[tshows]

Thanks for the replies.

 

[fnkycoldmedina]

even if you manage to get one its going to fail just like the original one .
did you try to clean the switch?

 

[Se7en]

Does anyone know where you can buy the push to talk switch for the Astatic D104M6B?

Take apart the switch down to every piece like I did and clean every part by hand than file good contacts on the ptt plates and put in new wire solder it back up u should be fine.

Sent from my DROIDX using Tapatalk 2

 

[tshows]

even if you manage to get one its going to fail just like the original one .
did you try to clean the switch?

I have cleaned the switch using contact cleaner, but it starts to act up again in 2 or 3 months.

 

[tshows]

Take apart the switch down to every piece like I did and clean every part by hand than file good contacts on the ptt plates and put in new wire solder it back up u should be fine.

Sent from my DROIDX using Tapatalk 2

Thank you for the info. Sounds like it should fix the problem.

 

[Se7en]

I have cleaned the switch using contact cleaner, but it starts to act up again in 2 or 3 months.

No u have to manually file the contacts quit taking short cuts....contact cleaner isn't always the problem solver solution.

Sent from my DROIDX using Tapatalk 2

 

[Mudfoot]

Truck stop CB Shop might have a donor mic for some $$$.

 

[Se7en]

Truck stop CB Shop might have a donor mic for some $$$.

More fixing less spending!!!

Sent from my Xoom using Tapatalk 2

 

[fnkycoldmedina]

I have cleaned the switch using contact cleaner, but it starts to act up again in 2 or 3 months.

yep ,thats how they all are .

 

[psycho]

I have cleaned the switch using contact cleaner, but it starts to act up again in 2 or 3 months.

Contact cleaner as well as gun scrubber spray work great for cleaning the switch.

 

[tshows]

Okay Guys I have another question. Have all the D104M6 mics had the switch problem or is it just the newer ones? Is there a way to look at the mic and tell if it will have the problem if not all of them have it? Thanks again for all your responses.