• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Eddie that is a florescent light not neon, and the high voltage node is above the coil, the current node is at the bottom and when I tested with a florescent light with the 1/2 wave Proton I couldn't get it to light at the center where the high current node is, only at the top & bottom high voltage nodes.


If the Vector was radiating current from the cone the florescent light wouldn't show it, it would only show the voltage node at the top & bottom of the upper 1/2 wave, unless you used a very low wattage light while transmitting several hundred watts, then you would probably see it light everywhere within several feet.


That's just the opposite of what I need to see.


Voltage proves little, the current is what would prove radiation but that will need some other means of testing, after I get it up & running with a new gamma/cone radial bracket.