You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thanks for the information on your Vector, I was both curious and unsure of what did what on your new project.

Don't bother with redoing your dipoles on my account. I found a reference from you on the Charlie Tango forum where you indicated you saw a 73 ohm impedance on you center fed HW. That is what I thought the impedance would likely be at that point, but I was looking to verify.

Some of the guys posting on another thread were talking about a 5/8 wave not working with a gamma match, because the impedance was too high. I was just wondering how they would explain the Sirio SD27 working, with its gamma match...if they were right.

It's not worth arguing about, but again I was curious if their conclusions made sense or was I just off base again.

[QUOTE="Marconi, post: 395516, member: 903"] Thanks for the information on your Vector, I was both curious and unsure of what did what on your new project. Don't bother with redoing your dipoles on my account. I found a reference from you on the Charlie Tango forum where you indicated you saw a 73 ohm impedance on you center fed HW. That is what I thought the impedance would likely be at that point, but I was looking to verify. Some of the guys posting on another thread were talking about a 5/8 wave not working with a gamma match, because the impedance was too high. I was just wondering how they would explain the Sirio SD27 working, with its gamma match...if they were right. It's not worth arguing about, but again I was curious if their conclusions made sense or was I just off base again. [/QUOTE]

Top Bottom