You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Were the radials over 1/4 wave including the ring/4 or PLUS the ring/4?

What changes to the Gamma do you expect will be required to match the full (1.5wl?) wave?

Hmmm, being a 3/4 wave x 2, I wonder if it could be possible to direct feed with a 1:1 balun at the point 3/4 wave down from the top since a 3/4wl is a ~50-72 ohm load? - Maybe a .75wl - 1.25wl piece of 75ohm (whichever is in phase with the bottom 1/4) up inside of/ into the lower 1/4 wave point/ feed point?

[QUOTE="CDX-007, post: 228785, member: 1254"] Were the radials over 1/4 wave including the ring/4 or PLUS the ring/4? What changes to the Gamma do you expect will be required to match the full (1.5wl?) wave? Hmmm, being a 3/4 wave x 2, I wonder if it could be possible to direct feed with a 1:1 balun at the point 3/4 wave down from the top since a 3/4wl is a ~50-72 ohm load? [IMG]http://www.mommaville.com/forums/images/smilies/105.gif[/IMG] - Maybe a .75wl - 1.25wl piece of 75ohm (whichever is in phase with the bottom 1/4) up inside of/ into the lower 1/4 wave point/ feed point? [/QUOTE]

Top Bottom