You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

More fun with this beast.

Built an outboard 8 volt regulator to feed the clarifier control. OK, bought a 7808 and a couple of caps from Fry's. Installed it and found... no difference.

Poked around a bit, put everything back the way I found it, and just to confirm the symptom hadn't changed, tried adjusting the AM oscillator one more time. Got it dialed in for RX, hit the key, and now it's dead on +/- about 1 HZ in TX.

So now I just need the correct size internal speaker (looks to be about a 3 inch opening) and she'll be good to go... on eBay.

[QUOTE="TM86, post: 644989, member: 41978"] More fun with this beast. Built an outboard 8 volt regulator to feed the clarifier control. OK, bought a 7808 and a couple of caps from Fry's. Installed it and found... no difference. Poked around a bit, put everything back the way I found it, and just to confirm the symptom hadn't changed, tried adjusting the AM oscillator one more time. Got it dialed in for RX, hit the key, and now it's dead on +/- about 1 HZ in TX. So now I just need the correct size internal speaker (looks to be about a 3 inch opening) and she'll be good to go... on eBay. [/QUOTE]

Top Bottom