You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

glads you have it going again
on those two resisters it would be best to put the flame proof resisters in there. they cost a little more but are a safer choice.
I think one is a 82 ohm and the other a 100 ohm. do not take me being right on the ohms. I am doing this from memory and the last one I worked on was about 18 years ago. I do not have the schematic for it but it should be the same as a 2950 DX radio. I will look and see if I can find the specs for you.this way you can use the radio until you get the proper ones purchased.

[QUOTE="sonoma, post: 621718, member: 756"] glads you have it going again on those two resisters it would be best to put the flame proof resisters in there. they cost a little more but are a safer choice. I think one is a 82 ohm and the other a 100 ohm. do not take me being right on the ohms. I am doing this from memory and the last one I worked on was about 18 years ago. I do not have the schematic for it but it should be the same as a 2950 DX radio. I will look and see if I can find the specs for you.this way you can use the radio until you get the proper ones purchased. [/QUOTE]

Top Bottom