You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I took the coil loose from the bottom of the vertical element.
Lowered the ground radials plate
Then removed the vertical element. Then slid the ground radials up off the mast
While it was down I put the piece of 7/8" up inside the vertical and then put the 10-32 screw back.
Reversed procedure to install

[QUOTE="W9WD, post: 142106"] I took the coil loose from the bottom of the vertical element. Lowered the ground radials plate Then removed the vertical element. Then slid the ground radials up off the mast While it was down I put the piece of 7/8" up inside the vertical and then put the 10-32 screw back. Reversed procedure to install [/QUOTE]

Top Bottom