You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Check the voltage on the gates of the fets. There should be a specified voltage in the tune up section. Should be no more than 5 volts maximum. If the voltage is too high that's what is blowing your fets. Many things can cause the voltage to be too high, open resistor or a shorted diode. If you give up my offer still stands!

[QUOTE="Tallman, post: 593657, member: 32129"] Check the voltage on the gates of the fets. There should be a specified voltage in the tune up section. Should be no more than 5 volts maximum. If the voltage is too high that's what is blowing your fets. Many things can cause the voltage to be too high, open resistor or a shorted diode. If you give up my offer still stands! [/QUOTE]

Top Bottom