You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Donald, also note in the 5/8 wave model; the point on the radiator where the phase cross-over occurs...does not look to be located at the correct segment point for the model. I have seen this before.

I also recall you asking me a similar question about this issue too...when you recently pointed out the same thing on my Vector model. You suggested I adjust the radiator or the radial length to move that point. That made sense, and I think I did that with the model, but I don't think it changed (fixed it) like you suggested.

I hope I'm clear here, and this makes sense.

[QUOTE="Marconi, post: 414623, member: 903"] Donald, also note in the 5/8 wave model; the point on the radiator where the phase cross-over occurs...does not look to be located at the correct segment point for the model. I have seen this before. I also recall you asking me a similar question about this issue too...when you recently pointed out the same thing on my Vector model. You suggested I adjust the radiator or the radial length to move that point. That made sense, and I think I did that with the model, but I don't think it changed (fixed it) like you suggested. I hope I'm clear here, and this makes sense. [/QUOTE]

Top Bottom