Marconi,
Again...it strikes me that you are showing the view antenna plot and expecting phase to be at the "side" of the antenna.
You provide a "plot" ...and write down "phase on" ...
But all one can subrtract with a amount of certaincy is current magnitude.
Of course you can have a good "guess" about the phase along, but it is not the way to provide it.
AND Again...you have pointed out that the "phase shift" happens at 0 degrees.
BUt...well...you do realise thats not the "center" of your phase shift ?
That "0" degree number has NOTHING TO DO WITH IT.
Im afraid you still dont understand
I strongly suggest you go back to where we started and try again.
@W5LZ
The only limitation NEC2 i see regarding this antennna is:
1- closed spaced wires.
2- those closed spaced wires under a angle.
However, it is clearly desribed in the manual how to handle this.
And while NEC4 would be a better approach, nec2 should provide a good indication.
It is 99 percent of the time the opperator behind it who doesnt understand and makes errors. A good example is how things are "interpertated" in this thread..
Regards,
Henry.
