• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Next, the side plates are installed and the microphone jack is secured in place:



Put all of the knobs on and it's starting to look like a real radio!



There is a metal tape shield that gets placed on the plastic battery retainer.  You must place this firmly on to ensure it doesn't come loose, or it might short the batteries:



The battery retainer is secured to the control board like so:



Now, you set the control portion of the rig aside and start assembling the RF deck.  Start with the rear case and remove all of the vinyl tape, just like you did on the front case.



Screw the heat sink in place, shown here on the bottom of the case, and affix your serial number.



Top Bottom