You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I deleted a post with a pic for re-write.
MRF422 project is proceeding.
My Bias Meter is behaving itself a little better after I placed a multi-hole barrel choke near the meter itself. I was surprised as I already had a ceramic across meter terminals. I'm seeing about a 200w AM carrier into DL and whatever on SSB. I have not yet tried to adjust the mica dipped caps inside the Input-Output Transformers. Presently, I have 390pF on Base side and 1120pF Collector side of each pair.

I think I'm seeing less current draw from my PS than 4 2879's, uncertain of that may be my own wishful thinking as it was a reason that I moved to 28v.
neil

[QUOTE="Naysayer, post: 793398, member: 57429"] I deleted a post with a pic for re-write. MRF422 project is proceeding. My Bias Meter is behaving itself a little better after I placed a multi-hole barrel choke near the meter itself. I was surprised as I already had a ceramic across meter terminals. I'm seeing about a 200w AM carrier into DL and whatever on SSB. I have not yet tried to adjust the mica dipped caps inside the Input-Output Transformers. Presently, I have 390pF on Base side and 1120pF Collector side of each pair. I think I'm seeing less current draw from my PS than 4 2879's, uncertain of that may be my own wishful thinking as it was a reason that I moved to 28v. neil [/QUOTE]

Top Bottom