You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

~~When you take those nuts off, you'd think the plates would lift off but they dont.~~
~~They lift about a 1/8 inch thats it.~~
I could try a bit harder with no board and see I gotta clean my mess of white prints all over from when I was just about to lose my marbles.

If someone has strips of this stuff it 30mm x 100mm I'd pay for several in an envelope.
It was my stupidity greasing the heatsink I guess but it'd be nice to replace them anyway they were looking pretty thin in a few spots and now the ripped ones make it a priorty.

**ok turns out ya can finagle them off and on after all.
/frybag

<blockquote data-quote="357" data-source="post: 640528" data-attributes="member: 10808"><img src="https://www.caraudioforumz.com/attachments/general-discussion-10/26413d1501375243-rodek-ra2150e-plug-help-100_1150.jpg" alt="" class="fr-fic fr-dii fr-draggable " data-size="" style="" /><s>When you take those nuts off, you&#039;d think the plates would lift off but they dont.</s><s>They lift about a 1/8 inch thats it.</s>I could try a bit harder with no board and see I gotta clean my mess of white prints all over from when I was just about to lose my marbles.If someone has strips of this stuff it 30mm x 100mm I&#039;d pay for several in an envelope.It was my stupidity greasing the heatsink I guess but it&#039;d be nice to replace them anyway they were looking pretty thin in a few spots and now the ripped ones make it a priorty.**ok turns out ya can finagle them off and on after all./frybag</blockquote>

[QUOTE="357, post: 640528, member: 10808"] [IMG]https://www.caraudioforumz.com/attachments/general-discussion-10/26413d1501375243-rodek-ra2150e-plug-help-100_1150.jpg[/IMG] [s]When you take those nuts off, you'd think the plates would lift off but they dont. They lift about a 1/8 inch thats it.[/s] I could try a bit harder with no board and see I gotta clean my mess of white prints all over from when I was just about to lose my marbles. If someone has strips of this stuff it 30mm x 100mm I'd pay for several in an envelope. It was my stupidity greasing the heatsink I guess but it'd be nice to replace them anyway they were looking pretty thin in a few spots and now the ripped ones make it a priorty. [B]**ok turns out ya can finagle them off and on after all.[/B] /frybag [/QUOTE]

Top Bottom