You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

1. Take a piece of scrap wood.
2. Drill two small holes through it, and get some machine screws, nuts and flat washers of appropriate size.
3. Bring one of the dipole sides and one side of the coax to one of the holes. Fasten them together on the wood, using the fasteners in step 2.
4. Do the same with the remaining conductors, BUT USE THE OTHER HOLE.
:headbang:headbang:headbang

[QUOTE="Beetle, post: 158335, member: 1066"] 1. Take a piece of scrap wood. 2. Drill two small holes through it, and get some machine screws, nuts and flat washers of appropriate size. 3. Bring one of the dipole sides and one side of the coax to one of the holes. Fasten them together on the wood, using the fasteners in step 2. 4. Do the same with the remaining conductors, BUT USE THE OTHER HOLE. :headbang:headbang:headbang [/QUOTE]

Top Bottom