You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Heya all!

I have an Xforce 2x4 base amplifier, and I want to be able to run SSB with it. It was originally biased class B (biased about .35V to the bases of the transistors) but that isn't clean enough for me for SSB use. I want to be able to bias this AB1. What's a good way to bias this amp for AB1? I'd need a parts list of what to get. Is .6V at the bases about what I'd need to make it at least closer to AB1? Thoughts and suggestions?

I'm currently using a switching supply to run the amp, so it has good regulated DC going to it, and the bias voltage is switched thru a relay. Any help would be much appreciated. Thanks!

~Cheers~

[QUOTE="ExitThirteen, post: 361757, member: 6878"] Heya all! I have an Xforce 2x4 base amplifier, and I want to be able to run SSB with it. It was originally biased class B (biased about .35V to the bases of the transistors) but that isn't clean enough for me for SSB use. I want to be able to bias this AB1. What's a good way to bias this amp for AB1? I'd need a parts list of what to get. Is .6V at the bases about what I'd need to make it at least closer to AB1? Thoughts and suggestions? I'm currently using a switching supply to run the amp, so it has good regulated DC going to it, and the bias voltage is switched thru a relay. Any help would be much appreciated. Thanks! ~Cheers~ [/QUOTE]

Top Bottom