You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Yup .6 or a tad more good, the circuit bob came up with has only been used to run 2 transistors in a stage as far as I know so you may need to build 2 of them for the output stage, I would not use the drive section in ssb mode, you will regret it.

Make sure you have tracking diodes to prevent thermal runaway, I used some transistors as the diodes for this, I don't remember the numbers on those but I can look it up if you decide to go that route.

[QUOTE="mackmobile43, post: 361961, member: 6232"] Yup .6 or a tad more good, the circuit bob came up with has only been used to run 2 transistors in a stage as far as I know so you may need to build 2 of them for the output stage, I would not use the drive section in ssb mode, you will regret it. Make sure you have tracking diodes to prevent thermal runaway, I used some transistors as the diodes for this, I don't remember the numbers on those but I can look it up if you decide to go that route. [/QUOTE]

Top Bottom