I've decided to thin down the herd of radios, all prices include shipping within the lower 48. Below are some of what I have for sale:
Cobra 20 plus 40 channel AM only mobile CB. Works good. I converted it from the 5 pin din mic to a 4 pin. It works on any Cobra/Galaxy/Connex wired mic. (1 grnd, 2 audio, 3 TX, 4 RX) This radio has a 3 wire hook up - orange (memory) red (power) black (grnd) I do not have a mic or bracket for this radio. Built in Taiwan or Thailand in 1990. $10
Uniden PC122XL 40 channel SSB/AM mobile. Nice little radio with SSB. Works great. Was peaked and tuned. When ran with a 575-M6 mic I had people complaining I was too loud, lol. Comes with Superstar mic, bracket and power cord. Also there's a toggle switch on the side - I mounted an RF limited big rig BR-1 reverb board inside. The switch allows you to turn on or off the board. However I didn't want to drill in the case for the switch, thus why it's hanging outside. The big rig board is preset via a plug in board pot on the board, but I'll also throw in the dual pot that it came with. $60. I'll subtract $10 off if you don't want the reverb board.
Xtreme 2018 echo mic with double talker. This mic will also do endless echo, alien voice, whammy effects, etc. Set up for Magnum 257HP or Magnum S45HP utilizing the radios power to make the mic work - it does not use batteries at all. The mic also allows the later model Magnum 257HP to have a built in talk back. 6 pin mic plug. Mic is out of the package but is lightly used. $50
Midland 13-830 23 ch AM mobile radio with mic. Works great. Built in Japan 1976. Has noise filtering on it. I recently painted the case in the gold color. Comes with power cord and I'll even throw in a hand made bracket made out of thick 1/8 inch steel. $10.
4 pill amp, looks like a Palomar 400 knock off. It has 4 of the SD1446 pills in it. Works great. $175
Midland 79-893 40 ch. AM/SSB radio. Built in Japan 1977. It's heavier than any other mobile CB I've ever encountered. Before you write this one off as "more Midland junk", let me tell you this sucker has a Uniden board in it, and not a Cybernet board. Comes with mic, 2 power cords and that's it. I recently had this aligned on SSB by a CB repairman with over 40 yrs. of experience. He even said it was like the old Cobra 138's. $40
Paradynamics PDC 600 SWR/power/modulation meter in metal box. Works good. Modulation meter is stuck. $20
One RF Limited X2 turbo echo board like new. Used once. Small, fits in almost any radio. Has a hellatious echo to it...you can do Alien voice, endless echo, etc. $15. Two single tone roger beep boards, used but tested good, and has switching relay to keep the beep out of the speaker on Cobras and Unidens. $5. Buy all three for $20
I also have a pair of 3 foot CB antennas, they're steel whips and they're center loaded. They come with RG59A/U coax, small barrel springs and mirror brackets. I don't have pics of them but can get them if someone is truly interested. I checked both of these antennas with an antenna analyzer and tuned them with the analyzer for maximum performance. Asking $8 a piece.
Buy more than 1 item and I will gladly combine shipping. I accept Paypal or postal money orders only.
Cobra 20 plus 40 channel AM only mobile CB. Works good. I converted it from the 5 pin din mic to a 4 pin. It works on any Cobra/Galaxy/Connex wired mic. (1 grnd, 2 audio, 3 TX, 4 RX) This radio has a 3 wire hook up - orange (memory) red (power) black (grnd) I do not have a mic or bracket for this radio. Built in Taiwan or Thailand in 1990. $10
Uniden PC122XL 40 channel SSB/AM mobile. Nice little radio with SSB. Works great. Was peaked and tuned. When ran with a 575-M6 mic I had people complaining I was too loud, lol. Comes with Superstar mic, bracket and power cord. Also there's a toggle switch on the side - I mounted an RF limited big rig BR-1 reverb board inside. The switch allows you to turn on or off the board. However I didn't want to drill in the case for the switch, thus why it's hanging outside. The big rig board is preset via a plug in board pot on the board, but I'll also throw in the dual pot that it came with. $60. I'll subtract $10 off if you don't want the reverb board.
Xtreme 2018 echo mic with double talker. This mic will also do endless echo, alien voice, whammy effects, etc. Set up for Magnum 257HP or Magnum S45HP utilizing the radios power to make the mic work - it does not use batteries at all. The mic also allows the later model Magnum 257HP to have a built in talk back. 6 pin mic plug. Mic is out of the package but is lightly used. $50
Midland 13-830 23 ch AM mobile radio with mic. Works great. Built in Japan 1976. Has noise filtering on it. I recently painted the case in the gold color. Comes with power cord and I'll even throw in a hand made bracket made out of thick 1/8 inch steel. $10.
4 pill amp, looks like a Palomar 400 knock off. It has 4 of the SD1446 pills in it. Works great. $175
Midland 79-893 40 ch. AM/SSB radio. Built in Japan 1977. It's heavier than any other mobile CB I've ever encountered. Before you write this one off as "more Midland junk", let me tell you this sucker has a Uniden board in it, and not a Cybernet board. Comes with mic, 2 power cords and that's it. I recently had this aligned on SSB by a CB repairman with over 40 yrs. of experience. He even said it was like the old Cobra 138's. $40
Paradynamics PDC 600 SWR/power/modulation meter in metal box. Works good. Modulation meter is stuck. $20
One RF Limited X2 turbo echo board like new. Used once. Small, fits in almost any radio. Has a hellatious echo to it...you can do Alien voice, endless echo, etc. $15. Two single tone roger beep boards, used but tested good, and has switching relay to keep the beep out of the speaker on Cobras and Unidens. $5. Buy all three for $20
I also have a pair of 3 foot CB antennas, they're steel whips and they're center loaded. They come with RG59A/U coax, small barrel springs and mirror brackets. I don't have pics of them but can get them if someone is truly interested. I checked both of these antennas with an antenna analyzer and tuned them with the analyzer for maximum performance. Asking $8 a piece.
Buy more than 1 item and I will gladly combine shipping. I accept Paypal or postal money orders only.
