You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I used a 1N4148 in D2, and D26 a 3.7 volt Zener as one of the tech bulletins recommended reducing D26 down from 5 volts to the 3.7 volt.

For that Tech bulletin, I used 2 1N4148's for the mod on L3, and I have been wondering if that is not causing my problem, just have not had the time to check this weekend to see if they shorted to ground, as it looks like L3 feeds voltage to TR5 on the schematic, or at least to me, I am not real great at following the way things go on one.

If I did wrong, let me know.

Thanks, Mike

[QUOTE="Sammitch, post: 583885, member: 43105"] I used a 1N4148 in D2, and D26 a 3.7 volt Zener as one of the tech bulletins recommended reducing D26 down from 5 volts to the 3.7 volt. For that Tech bulletin, I used 2 1N4148's for the mod on L3, and I have been wondering if that is not causing my problem, just have not had the time to check this weekend to see if they shorted to ground, as it looks like L3 feeds voltage to TR5 on the schematic, or at least to me, I am not real great at following the way things go on one. If I did wrong, let me know. Thanks, Mike [/QUOTE]

Top Bottom