You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I have the new final and driver on the way. Just to clarify, the 47 ohm resistor will go from base to emitter, which the schematic shows as ground, or should it go to chassis ground?
One more question. Are 1n4148 diodes OK to use for the Tech Bulletin #1210?
I assume, that resistor being in the wrong place is also the cause of TR5 shorting as soon as you key the mic, correct?
I thought this was a virgin radio, but I am going to have to really give it a good look over, some monkey has been in it for the resistor to be in the wrong place.

Thanks, Mike

[QUOTE="Sammitch, post: 584926, member: 43105"] I have the new final and driver on the way. Just to clarify, the 47 ohm resistor will go from base to emitter, which the schematic shows as ground, or should it go to chassis ground? One more question. Are 1n4148 diodes OK to use for the Tech Bulletin #1210? I assume, that resistor being in the wrong place is also the cause of TR5 shorting as soon as you key the mic, correct? I thought this was a virgin radio, but I am going to have to really give it a good look over, some monkey has been in it for the resistor to be in the wrong place. Thanks, Mike [/QUOTE]

Top Bottom