You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Heres what Ive got. The white wires are shielded teflon. My freq side has the inf cap on the ground side and a 100 ohm resistor on the signal side. The power feeds straight off the switch, Had the ground tied to the power supply by the black wire there. Moved my ground to the negative side of C134, no change. The 7808 is isolated from the housing inside with the plj. Removed the face and isolated the plj, no change. I know Im doing something wrong, I just dont know what.

[QUOTE="Spams24, post: 854902, member: 69335"] Heres what Ive got. The white wires are shielded teflon. My freq side has the inf cap on the ground side and a 100 ohm resistor on the signal side. The power feeds straight off the switch, Had the ground tied to the power supply by the black wire there. Moved my ground to the negative side of C134, no change. The 7808 is isolated from the housing inside with the plj. Removed the face and isolated the plj, no change. I know Im doing something wrong, I just dont know what. [/QUOTE]

Top Bottom