You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thanks LC.
I feel the need to add a caution about enlarging the face plate for these type mods.
I am not talking about the plastic bezel but about the metal structure behind the bezel.

Careful measurement here counts. If you are the type to measure it with a yardstick, mark it with a piece of chalk and cut it with a chisel, you will not get a good result. I.e. you may have to carve out the plastic bezel to get the knob installed and enable it to rotate if you do not make precise measurements.

Slow and steady is the way.

73's
David

[QUOTE="Dmans, post: 674856, member: 49046"] Thanks LC. I feel the need to add a caution about enlarging the face plate for these type mods. I am not talking about the plastic bezel but about the metal structure behind the bezel. Careful measurement here counts. If you are the type to measure it with a yardstick, mark it with a piece of chalk and cut it with a chisel, you will not get a good result. I.e. you may have to carve out the plastic bezel to get the knob installed and enable it to rotate if you do not make precise measurements. Slow and steady is the way. 73's David [/QUOTE]

Top Bottom