You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

voltage that feeds the oscillators,
if the fiter is not too far away from center you can use your ears to get in the ball park tone wise & adjust the opposite sideband for similar sound as Nomad told you,

if you don't have radio ears you can do it the old way with a watt meter & audio sig gen,
pull up an old yaesu service manual on the www for instructions on how to do it with a watt meter,

very rarely does aligning ssb cb's to the service manual oscillator settings give the best sound or align the radio as it should be with reasonably equal frequency response on both sidebands,

that would be like giving you a capacitance value setting for a crystal trimmer & expecting you will be on frequency.

[QUOTE="bob85, post: 614313, member: 18"] voltage that feeds the oscillators, if the fiter is not too far away from center you can use your ears to get in the ball park tone wise & adjust the opposite sideband for similar sound as Nomad told you, if you don't have radio ears you can do it the old way with a watt meter & audio sig gen, pull up an old yaesu service manual on the www for instructions on how to do it with a watt meter, very rarely does aligning ssb cb's to the service manual oscillator settings give the best sound or align the radio as it should be with reasonably equal frequency response on both sidebands, that would be like giving you a capacitance value setting for a crystal trimmer & expecting you will be on frequency. [/QUOTE]

Top Bottom