You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

If you have 11.2V at pin 9 of the PLL, most likely it has taken out the PLL too. It doesn't always happen, but I am willing to bet that the PLL is bad as well. Replace the MB3756 regulator first, and if you get 8V at pin 1 when you're done, and 8V at pin 9 of the PLL and you still do not get TX/RX, the PLL has gone fault and will need to be replaced.

Hope this helps!

~Cheers~

[QUOTE="ExitThirteen, post: 482354, member: 6878"] If you have 11.2V at pin 9 of the PLL, most likely it has taken out the PLL too. It doesn't always happen, but I am willing to bet that the PLL is bad as well. Replace the MB3756 regulator first, and if you get 8V at pin 1 when you're done, and 8V at pin 9 of the PLL and you still do not get TX/RX, the PLL has gone fault and will need to be replaced. Hope this helps! ~Cheers~ [/QUOTE]

Top Bottom