You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

All is good now i followed the instructions below works great.

1 Remove D52
2 Remove R44
3 Remove R174 and solder a jumper in its place.
4 Unsolder the red wire that comes from the Voice Lock pot from the PCB and solder in to pin 1 IC4 MB3756.
5 Change R175 to a 1K

[QUOTE="kaos513, post: 572431, member: 41055"] All is good now i followed the instructions below works great. 1 Remove D52 2 Remove R44 3 Remove R174 and solder a jumper in its place. 4 Unsolder the red wire that comes from the Voice Lock pot from the PCB and solder in to pin 1 IC4 MB3756. 5 Change R175 to a 1K [/QUOTE]

Top Bottom