• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
  • The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Initial settings...

[ATTACH=full]39566[/ATTACH]

CAL on,

SWR CAL - Mid point


[ATTACH=full]39564[/ATTACH]


[ATTACH=full]39565[/ATTACH]


Now,

Meter was set to 200 ohm setting...

NOW SET FOR 20K, 20,000 ohms

When Third Trace from left to Board ground is checked...shows infinite...

[ATTACH=full]39567[/ATTACH]

This gets interesting...

4th Trace from LEFT (or 3rd from RIGHT)

shows 3.53...

AND IS VARIABLE!

Adjust your SWR CAL knob to verify this...


[ATTACH=full]39568[/ATTACH]

Turn front panel switch to SWR...

SAME 4th Trace from LEFT - SHOWS INFINITE

[ATTACH=full]39569[/ATTACH]


However 3rd trace from LEFT - shows Reading!

And also is variable!

[ATTACH=full]39570[/ATTACH]

All midpoint readings are in the 3.5K range...

[ATTACH=full]39571[/ATTACH]

[ATTACH=full]39572[/ATTACH]





Top Bottom