You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thanks, but I feel just as frustrated too...

I guess - when all else fails - replace the PLL...

But t raises so many questions...

BCD from the channel selector - is it correct? (Jiggle the knob)

AM Mode - TR33 and TR31 - these two, with the D36, D37 an D38 - all NEED to send power to X4 in ALL TX but not all (AM not) RX modes...

PLL Pin 6 - man I remember a convo or two on CB tricks about that 22K resistor - affects all PLLs' Cobra and Uniden - they do use on the BCD/LED Display encoders...the Detent in one, grounds when good, the other POWERS when good...

WOW - it's trying to keep it all straight....

:+> Andy <+:

[QUOTE="Handy Andy, post: 626955, member: 52309"] Thanks, but I feel just as frustrated too... I guess - when all else fails - replace the PLL... But t raises so many questions... BCD from the channel selector - is it correct? (Jiggle the knob) AM Mode - TR33 and TR31 - these two, with the D36, D37 an D38 - all NEED to send power to X4 in ALL TX but not all (AM not) RX modes... PLL Pin 6 - man I remember a convo or two on CB tricks about that 22K resistor - affects all PLLs' Cobra and Uniden - they do use on the BCD/LED Display encoders...the Detent in one, grounds when good, the other POWERS when good... WOW - it's trying to keep it all straight.... :+> Andy <+: [/QUOTE]

Top Bottom