You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Ok....I have a question. I think I have located the intermittent problem around IC5 (mixer). When I test IC5 with my DMM, I have correct voltages on all pins (as per the service manual). Pin 2 is the output and even though I have .469v rx and 7.93v tx off pin 2, I don't have the RF level of .357v coming off pin2 using the RF probe and I do not have the 85mv tx RF level off the one leg of C163 and on down the line towards the base of TR39 (pre-driver). Does this mean that IC5 is defective?

[QUOTE="Unit 75, post: 681993, member: 42248"] Ok....I have a question. I think I have located the intermittent problem around IC5 (mixer). When I test IC5 with my DMM, I have correct voltages on all pins (as per the service manual). Pin 2 is the output and even though I have .469v rx and 7.93v tx off pin 2, I don't have the RF level of .357v coming off pin2 using the RF probe and I do not have the 85mv tx RF level off the one leg of C163 and on down the line towards the base of TR39 (pre-driver). Does this mean that IC5 is defective? [/QUOTE]

Top Bottom