You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Ok guys...This is important. I was doing some research due to the above post. You Cobra peeps make sure you write this down.
Even though the 148GTL and 2000GTL are alike in layout....I noticed this.

Cobra 148GTL
L47 is the 7.800 MHz peaking coil
L48 is the 34 MHz peaking coil

Cobra 2000GTL
L47 is the 34 MHz peaking coil
L48 is the 7.800 MHz peaking coil

So even though the board layout is the same...CHECK THE ACTUAL SILK SCREENING on the board because those two peaking coils are marked opposite of one another !!
Looks like someone had removed a peaking coil from a 148GTL and installed it in this 2000 GTL. That is what messed it all up.
-75

[QUOTE="Unit 75, post: 682110, member: 42248"] Ok guys...This is important. I was doing some research due to the above post. You Cobra peeps make sure you write this down. Even though the 148GTL and 2000GTL are alike in layout....I noticed this. Cobra 148GTL L47 is the 7.800 MHz peaking coil L48 is the 34 MHz peaking coil Cobra 2000GTL L47 is the 34 MHz peaking coil L48 is the 7.800 MHz peaking coil So even though the board layout is the same...CHECK THE ACTUAL SILK SCREENING on the board because those two peaking coils are marked opposite of one another !! Looks like someone had removed a peaking coil from a 148GTL and installed it in this 2000 GTL. That is what messed it all up. -75 [/QUOTE]

Top Bottom