You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I did find the proper coils to turn elsewhere on this sight on another post, very helpful, and could not get anymore than 8 watts maximum. I also notices that the wire going to the tp7 has been removed and soldered to jp1. What is the purpose of that? I did check the driver bias and it is right at 25 ma.

I do not know how the check the final bias since the wire has been relocated.

[QUOTE="badcordoba, post: 132791, member: 9070"] I did find the proper coils to turn elsewhere on this sight on another post, very helpful, and could not get anymore than 8 watts maximum. I also notices that the wire going to the tp7 has been removed and soldered to jp1. What is the purpose of that? I did check the driver bias and it is right at 25 ma. I do not know how the check the final bias since the wire has been relocated. [/QUOTE]

Top Bottom