You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

You can use a higher value, just you may want to swap out that for a newer one.

One (frustrating) aspect of Capacitors - especially filter ones - like the ones used in main power supply feeds, are their ESR / ESL appearance in the circuits they are used in.

Not so much digital as the analog linear types - for they show the whines, spikes and noises the cheaper caps seem to act poorly upon. So I'm suggesting a good quality cap for both output and input filtering.

10uF seems kinda small I've seen 100uF but remember too, the 2000 does not have a power supply filter system downstream into the power supply branches like the other smaller lesser cousins and brothers which do,

[QUOTE="Handy Andy, post: 756504, member: 52309"] You can use a higher value, just you may want to swap out that for a newer one. One (frustrating) aspect of Capacitors - especially filter ones - like the ones used in main power supply feeds, are their ESR / ESL appearance in the circuits they are used in. Not so much digital as the analog linear types - for they show the whines, spikes and noises the cheaper caps seem to act poorly upon. So I'm suggesting a good quality cap for both output and input filtering. 10uF seems kinda small I've seen 100uF but remember too, the 2000 does not have a power supply filter system downstream into the power supply branches like the other smaller lesser cousins and brothers which do, [/QUOTE]

Top Bottom