just got a cobra 2000gtl from ebay. Made in Taiwan. Well you know the story by now someone had to put mods in it. The person unlocked the clarifier. I need to know were the red and yellow wires on the clarifier go to on the main board before the open clarifier mod was done? The red wire has been cut and wired to the reg board. There is a thick blue wire with a white and shield wire on the inside that has been un soldered right behind the rf and swr control knob. I need to know were the two wires belong? If anyone would have pictures of the control knobs showing the wires hook up would be a big help. I appreciate any and all help i can get.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
Retevis is giving away Radios for the New Year and Every Member is Eligible. Click Here to see the details!
COBRA 2000GTL HELP
- Thread starter cbkidd1
- Start date
- No one is chatting at the moment.
