You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Wow both you guys (Nomadradio&Loosecanon)were a really big help. Thank you! I have managed my way through tracing the wiring back to the way it was intended. It appears to be only one transistor cut and 3 resistors in the same area as the crystal I just soldered back into the board. The service manual identifies these, I will work on them tomorrow. Thanks again and if I run into any more issues I will definitely ask. 73's

Thank you 338_MtRushmore this is the first forum I have ever posted and was unsure if I was doing it correctly. It has been a great 1st experience. Thanks again to everyone!

[QUOTE="RichardHartman, post: 658901, member: 54277"] Wow both you guys (Nomadradio&Loosecanon)were a really big help. Thank you! I have managed my way through tracing the wiring back to the way it was intended. It appears to be only one transistor cut and 3 resistors in the same area as the crystal I just soldered back into the board. The service manual identifies these, I will work on them tomorrow. Thanks again and if I run into any more issues I will definitely ask. 73's Thank you 338_MtRushmore this is the first forum I have ever posted and was unsure if I was doing it correctly. It has been a great 1st experience. Thanks again to everyone! [/QUOTE]

Top Bottom