You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Sorry not 24,can't read my own writing. I leaked out the recei e again,peaked out 16,only have .680 for the VCI,there was all the frequencies at all test points again,set the 3.5,I walked 3 feet to grab my phone the post, and now,all of the correct,or almost correct freqs are gone again,spinning through kHz, and a occasionally a 1 MHz will show up,that's all in the MHz I can find running the cores back and forth,just disappeared again I the blink of an eye.
Should I put the IC2 TA7310P in,or figure out why the freqs disappeared. Goons copy your post and go up to the house and have it with me and go through it. Post soon.

[QUOTE="baconater4749, post: 766000"] Sorry not 24,can't read my own writing. I leaked out the recei e again,peaked out 16,only have .680 for the VCI,there was all the frequencies at all test points again,set the 3.5,I walked 3 feet to grab my phone the post, and now,all of the correct,or almost correct freqs are gone again,spinning through kHz, and a occasionally a 1 MHz will show up,that's all in the MHz I can find running the cores back and forth,just disappeared again I the blink of an eye. Should I put the IC2 TA7310P in,or figure out why the freqs disappeared. Goons copy your post and go up to the house and have it with me and go through it. Post soon. [/QUOTE]

Top Bottom