You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

BTW - it is the NPC "that makes it" but it's SM5126BP - see if you can find one like that...

Else ...
It may be what I feared, the BCD programming is different - you'll always see a correctly displayed channel, because it uses a different set of "tines" on dual-sided wafers that set channel programming on one side of the wafer and the other side simply shows the channel the rear part of those same wafers is programmed for.

So in some PLL service manuals - a "truth table" is used to show how the binary programming is used

If we only had one for the Cobra we may be able to find the PLL swap that will work

[QUOTE="Handy Andy, post: 652760, member: 52309"] BTW - it is the NPC "that makes it" but it's SM5126BP - see if you can find one like that... Else ... It may be what I feared, the BCD programming is different - you'll always see a correctly displayed channel, because it uses a different set of "tines" on dual-sided wafers that set channel programming on one side of the wafer and the other side simply shows the channel the rear part of those same wafers is programmed for. So in some PLL service manuals - a "truth table" is used to show how the binary programming is used If we only had one for the Cobra we may be able to find the PLL swap that will work [/QUOTE]

Top Bottom