You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Ya I can do that shouldn’t be bad... just mark the slug ( so you know where to put it back at... I don’t have a scope or freq. counter )

alligator clip dvm on
Turn slug on each channel until it says at certain voltage

I do have:
Dosy meter
Mfj dummy load
Dvm

I don’t have:
Frequency counter
oscilloscope

Most likely I won’t be able to do till day after tomorrow

like I said PLL HAS ALL the proper voltages
TR23 has proper 8 volts
RX/TX light is green, turns Red when you key mic
PA mode does work with aux speaker

[QUOTE="Buzzard78945, post: 714437, member: 57118"] Ya I can do that shouldn’t be bad... just mark the slug ( so you know where to put it back at... I don’t have a scope or freq. counter ) alligator clip dvm on Turn slug on each channel until it says at certain voltage I do have: Dosy meter Mfj dummy load Dvm I don’t have: Frequency counter oscilloscope Most likely I won’t be able to do till day after tomorrow like I said PLL HAS ALL the proper voltages TR23 has proper 8 volts RX/TX light is green, turns Red when you key mic PA mode does work with aux speaker [/QUOTE]

Top Bottom