You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Okay right after posting above I decide to install a new Diode in D8. Also I think I failed to mention I had replace C123 in the beginning. Well believe it or not, D8 did not melt!

It seems to be holding its own.

So it may be due not to have that sleeve on the bolt of the Mosfet when it was installed.

Should I move forward and try to install the mosfet transplant again?

Of course I need to find a sleeve for that bolt which I do not have on hand, but I may
be able to take one from another junker.

But I will wait to hear from you Andy.

Thank you.

[QUOTE="Signal Kicker, post: 754424, member: 60279"] Okay right after posting above I decide to install a new Diode in D8. Also I think I failed to mention I had replace C123 in the beginning. Well believe it or not, D8 did not melt! It seems to be holding its own. So it may be due not to have that sleeve on the bolt of the Mosfet when it was installed. Should I move forward and try to install the mosfet transplant again? Of course I need to find a sleeve for that bolt which I do not have on hand, but I may be able to take one from another junker. But I will wait to hear from you Andy. Thank you. [/QUOTE]

Top Bottom