You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Hello Andy,

Yes I was trying to create the EKL as you had posted earlier in this discussion.
I used a 470 and a 3.3k along with the 1n4148 diode.
I used these values as I had seen in one of the Pics.

If I may ask, what resistors would you recommend for the EKL creation?
And in what configuration should they be arranged?

Could you send me a link to the Bi-Polar to Mosfet conversion?

As for the goo, these mosfet must be very sensitive compared to bi-polar.
But okay I will clean up the goo and put less on and perhaps find another type.

I would need a suggested valve of R1 and R2 though for the EKL creation.

I hope you are enjoying your Friday.
Thank you Andy.

[QUOTE="Signal Kicker, post: 754747, member: 60279"] Hello Andy, Yes I was trying to create the EKL as you had posted earlier in this discussion. I used a 470 and a 3.3k along with the 1n4148 diode. I used these values as I had seen in one of the Pics. If I may ask, what resistors would you recommend for the EKL creation? And in what configuration should they be arranged? Could you send me a link to the Bi-Polar to Mosfet conversion? As for the goo, these mosfet must be very sensitive compared to bi-polar. But okay I will clean up the goo and put less on and perhaps find another type. I would need a suggested valve of R1 and R2 though for the EKL creation. I hope you are enjoying your Friday. Thank you Andy. [/QUOTE]

Top Bottom