Hmm.
The best way to put this is, Remove the L22 R56 combo, then try again...
[ATTACH=full]42939[/ATTACH]
You're going to have to experiment...with Resistor values to use. In a post above, a YTuber put together a show for the rest of us using those values in his hands in the Screengrab.
So you'll have to try making this work with what you want to work with and mods if any done to the radio to make the MOSFET work in this scenario.
Use the LOWER value resistor of your EKL - in my above Pics is that 470 ohm ON THE DIODE stem of the part.
The 3.3K was an ARBITRARY value due to the level of input capacitance used.
If your input Cap is 220pF - you need some resistance there to make it work to Push us the RF level to be rectified to obtain a voltage.
Helped someone a long time ago at CB Tricks - this might also provide you some insight...
[ATTACH=full]42937[/ATTACH]
Use as you wish...
you asked...
The information changes a lot - in the past few years several MOSFETs' have shown different responses and failures, so to be honest, you DON'T want to use old data, you may want to do a search around this site for MOSFET you'll see I've posted several pages...so look around the Forums here - the info here is more current.
