You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

So long as all of the current is getting to the board without anything creating resistance to it, it should be OK.

It could be bad caps too, as it is an older radio.

Another thing that is possible, is that the TX tuning cans are out of alignment.

Hard to troubleshoot radios w/o having hands on.
Your ability to troubleshoot will change as you get more experience. Just keep trying and don't stop until you nail it - IMO. There are a lot of guys on this forum with CB radio repair experience that can help . . .

[QUOTE="Robb, post: 555071, member: 8446"] So long as all of the current is getting to the board without anything creating resistance to it, it should be OK. It could be bad caps too, as it is an older radio. Another thing that is possible, is that the TX tuning cans are out of alignment. Hard to troubleshoot radios w/o having hands on. Your ability to troubleshoot will change as you get more experience. Just keep trying and don't stop until you nail it - IMO. There are a lot of guys on this forum with CB radio repair experience that can help . . . [/QUOTE]

Top Bottom