You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

you are making this too hard. I thought you had already did the alignment. if not do so and it is so simple to verify you have the 12 volts to the board after the power switch.. have no idea why you would think you would have to tear the radio apart to check voltages after the switch. you pull the botom and top cover and the power switch is right there. what I had mentioned has nothing to do with another radio working off the same power supply and meter. it is just to verify you have full voltage. it is just I have seen radios do this and the power switch was weak. the pres washington 858 PLL radios had this problem years ago. .

[QUOTE="sonoma, post: 555238, member: 756"] you are making this too hard. I thought you had already did the alignment. if not do so and it is so simple to verify you have the 12 volts to the board after the power switch.. have no idea why you would think you would have to tear the radio apart to check voltages after the switch. you pull the botom and top cover and the power switch is right there. what I had mentioned has nothing to do with another radio working off the same power supply and meter. it is just to verify you have full voltage. it is just I have seen radios do this and the power switch was weak. the pres washington 858 PLL radios had this problem years ago. . [/QUOTE]

Top Bottom