You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thanks for the response. I used a workman Roger beep. I installed the button on the hot wire but that killed all my audio all together I tried the ground but that left it buzzing. Process of elimination leaves only the white and the green wire so it has to be one of them. I was busy setting up an I max 2000 today so I didn't have much time to item the radio to tell you what ponds these connect to and I forget. I do remember disconnecting a wire or 2 from the mic plug and connecting them to the terminals on the r.b. board, maybe tx and rx if I remember. I'll have to look it up to tell you exactly. I really appreciate you trying to help out and hope you can guide me in the right direction.

[QUOTE="Dino360, post: 472762, member: 40815"] Thanks for the response. I used a workman Roger beep. I installed the button on the hot wire but that killed all my audio all together I tried the ground but that left it buzzing. Process of elimination leaves only the white and the green wire so it has to be one of them. I was busy setting up an I max 2000 today so I didn't have much time to item the radio to tell you what ponds these connect to and I forget. I do remember disconnecting a wire or 2 from the mic plug and connecting them to the terminals on the r.b. board, maybe tx and rx if I remember. I'll have to look it up to tell you exactly. I really appreciate you trying to help out and hope you can guide me in the right direction. [/QUOTE]

Top Bottom