You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Kaos, everything in your picture looks correct, but not knowing how the display works on that meter, i would set the range to the 200m setting and make sure that it still displays a "25" and doesn't show a "1" which would indicate an over range condition.

you have it set to the 2 amp range in the pictures.

If it were my meter, i would set both driver and final using the 200milliamp range.
LC

[QUOTE="loosecannon, post: 607834, member: 1368"] Kaos, everything in your picture looks correct, but not knowing how the display works on that meter, i would set the range to the 200m setting and make sure that it still displays a "25" and doesn't show a "1" which would indicate an over range condition. you have it set to the 2 amp range in the pictures. If it were my meter, i would set both driver and final using the 200milliamp range. LC [/QUOTE]

Top Bottom