You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I can measure the coils I made easy enough. How do I do it with the analyzer? Just attach a couple of wire leads to the balun and put each lead at each end of the coil?

In response to John's question about the tag ends, according the AD instructions for their antenna you adjust the main wire first for 40m, then adjust the tag ends for where you want the lowest SWR for 80m.

[QUOTE="Moleculo, post: 121178, member: 1"] I can measure the coils I made easy enough. How do I do it with the analyzer? Just attach a couple of wire leads to the balun and put each lead at each end of the coil? In response to John's question about the tag ends, according the AD instructions for their antenna you adjust the main wire first for 40m, then adjust the tag ends for where you want the lowest SWR for 80m. [/QUOTE]

Top Bottom