You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

OK, I did it that way already, but I used a 1:1 current balun attached to the meter with two wire leads coming off that to the coil to measure it. When I do that, the meter reads: L(Z>650) at 7mhz, meaning it's out of the range the meter can measure. I'll do it again and move the frequency higher until I can get a reading for comparitive purposes.

[QUOTE="Moleculo, post: 121559, member: 1"] OK, I did it that way already, but I used a 1:1 current balun attached to the meter with two wire leads coming off that to the coil to measure it. When I do that, the meter reads: [FONT=TimesNewRomanPSMT]L(Z>650) at 7mhz, meaning it's out of the range the meter can measure. I'll do it again and move the frequency higher until I can get a reading for comparitive purposes.[/FONT] [/QUOTE]

Top Bottom