You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Going to stop here for tonight. I managed to at least get the parts installed and Microsoft Painted in the missing parts I need to put in. But is this the correct way? The picture is kinda blurry from the thread, but I am assuming the center pin of the TIP42C is right on the 12v, the right pin going to the 40 ohm 10 watt wire wound, and the left leg going to the relay being a 1k ohm 1 watt resistor? Or should it be a 2 watt part?

[ATTACH=full]72385[/ATTACH]

[QUOTE="doffo, post: 855328, member: 27822"] Going to stop here for tonight. I managed to at least get the parts installed and Microsoft Painted in the missing parts I need to put in. But is this the correct way? The picture is kinda blurry from the thread, but I am assuming the center pin of the TIP42C is right on the 12v, the right pin going to the 40 ohm 10 watt wire wound, and the left leg going to the relay being a 1k ohm 1 watt resistor? Or should it be a 2 watt part? [ATTACH type="full" size="1201x675"]72385[/ATTACH] [/QUOTE]

Top Bottom