You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

Thank you so much! I will correct the transistor. I believe I may have 1/2 watt 1000 ohm somewhere in my parts. My brother has some misc. parts drawers, and I swore I seen some RF Chokes in there! Feels like a large step going towards the right direction.

Only question for now is, I thought The Commet amp was "auto ssb" in a sense that on either mode, it at least keeps the relays on long enough to keep the relays from chattering. Thats why I removed the 470uf 50V cap while I was underneath removing the green resistor. If that is the cap where I can increase the value to the 2200uf, I can just do so from the top side. (I hope I dont have to get back under the board again!)

I included the picture of the bottom of the board to maybe help if that is what the 470UF capacitor did on the topside.

[ATTACH=full]72389[/ATTACH]I just found it strange on the bias thread, that he had to include the 2200uf, but the picture didn't show the stock 470uf cap that shoulda been there.

<blockquote data-quote="doffo" data-source="post: 855334" data-attributes="member: 27822">Thank you so much! I will correct the transistor. I believe I may have 1/2 watt 1000 ohm somewhere in my parts. My brother has some misc. parts drawers, and I swore I seen some RF Chokes in there!&nbsp; Feels like a large step going towards the right direction.Only question for now is, I thought The Commet amp was &quot;auto ssb&quot; in a sense that on either mode, it at least keeps the relays on long enough to keep the relays from chattering.&nbsp; Thats why I removed the 470uf 50V cap while I was underneath removing the green resistor. If that is the cap where I can increase the value to the 2200uf, I can just do so from the top side. (I hope I dont have to get back under the board again!)&nbsp; I included the picture of the bottom of the board to maybe help if that is what the 470UF capacitor did on the topside.[ATTACH=full]72389[/ATTACH]I just found it strange on the bias thread, that he had to include the 2200uf, but the picture didn&#039;t show the stock 470uf cap that shoulda been there.</blockquote>

[QUOTE="doffo, post: 855334, member: 27822"] Thank you so much! I will correct the transistor. I believe I may have 1/2 watt 1000 ohm somewhere in my parts. My brother has some misc. parts drawers, and I swore I seen some RF Chokes in there! Feels like a large step going towards the right direction. Only question for now is, I thought The Commet amp was "auto ssb" in a sense that on either mode, it at least keeps the relays on long enough to keep the relays from chattering. Thats why I removed the 470uf 50V cap while I was underneath removing the green resistor. If that is the cap where I can increase the value to the 2200uf, I can just do so from the top side. (I hope I dont have to get back under the board again!) I included the picture of the bottom of the board to maybe help if that is what the 470UF capacitor did on the topside. [ATTACH type="full" size="1194x672"]72389[/ATTACH]I just found it strange on the bias thread, that he had to include the 2200uf, but the picture didn't show the stock 470uf cap that shoulda been there. [/QUOTE]

Top Bottom