You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

I came up with a good non-conductive mast. I took a twelve foot 1 7/8 (OD) piece of schedule 80 PVC pipe, and slid a 1 1/2" diameter wooden closet rod dowel rod inside. This made it RIGID. Then I slid the whole kit and kaboodle inside the metal push up pole base. A perfect fit, and a perfect 20 foot mast, that isn't conductive (on the top half).

Viola!

[QUOTE="Bushmaster, post: 119074, member: 1589"] I came up with a good non-conductive mast. I took a twelve foot 1 7/8 (OD) piece of schedule 80 PVC pipe, and slid a 1 1/2" diameter wooden closet rod dowel rod inside. This made it RIGID. Then I slid the whole kit and kaboodle inside the metal push up pole base. A perfect fit, and a perfect 20 foot mast, that isn't conductive (on the top half). Viola! [/QUOTE]

Top Bottom