You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
The Feb 2025 Radioddity Giveaway Results are In! Click Here to see who won!

Reply to thread

Message

after you install EASYPAL, everything is pretty straight forward. input your call in the setup menu and set the comm port.
the software will auto detect if your comm port is already in use and if you enter a port that is already in use it will tell you, so just enter the next one 'till it accepts it.

also keep the WAV audio slider and the LINE IN (or mike in) sliders about the same level.

when xmitting do NOT use any compression and keep the ALC deflection at a minimum.

[QUOTE="hookedon6, post: 126731, member: 7336"] after you install EASYPAL, everything is pretty straight forward. input your call in the setup menu and set the comm port. the software will auto detect if your comm port is already in use and if you enter a port that is already in use it will tell you, so just enter the next one 'till it accepts it. also keep the WAV audio slider and the LINE IN (or mike in) sliders about the same level. when xmitting do NOT use any compression and keep the ALC deflection at a minimum. [/QUOTE]

Top Bottom